|
| 外型尺寸 | |
| 貨號 | |
| 品牌 | 德國KAYSEN |
| 用途 | 輸送不含固體顆粒，具有腐蝕性，粘度類似于水的液體，適用于石油、化工、冶金、電力、造紙、食品、制藥和合成纖維等部門 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 磁力 |
| 適用介質 | 水 |
| 是否進口 |
進口不銹鋼磁力泵(進口磁力泵）
德國KAYSEN凱森不銹鋼磁力泵——零泄漏安全輸送解決方案
產品概述
德國KAYSEN凱森不銹鋼磁力泵采用創新磁力耦合傳動技術，通過完全隔離的動靜密封結構，實現動力傳遞零接觸、介質輸送零泄漏。該產品特別適用于輸送易燃、易爆、有毒或高價值介質，為化工、制藥、電子等行業提供安全可靠的流體輸送保障。
工作原理
采用高性能稀土永磁體構成完整的磁力驅動系統。當電機帶動外磁轉子旋轉時，磁場穿透隔離套帶動內磁轉子同步運轉，實現動力無接觸傳遞。創新的磁路設計確保高效扭矩傳輸，同時維持穩定的磁場強度。
核心技術與結構特點
-
高效磁力傳動系統
采用高性能永磁材料，工作溫度范圍廣，磁能穩定，確保長期高效運轉 -
特種隔離套設計
優化結構與材質選擇，有效降低渦流損耗，提高能源利用效率 -
智能冷卻潤滑系統
精確控制冷卻液流量，確保關鍵部件溫度穩定，延長設備使用壽命 -
耐磨滑動軸承
選用高性能工程陶瓷材料，具備優異的耐腐蝕性和耐磨性能 -
全密封結構
動密封轉化為靜密封，徹底解決泄漏隱患，確保絕對安全
產品優勢
-
100%無泄漏
全封閉式結構設計，徹底杜絕介質外泄風險 -
安全可靠
消除密封泄漏隱患，特別適合危險介質輸送 -
高效節能
優化的磁路設計與低阻力軸承系統，能耗顯著降低 -
維護簡便
模塊化設計，關鍵部件易于檢修更換 -
長壽命運行
耐磨部件與智能冷卻系統確保設備持久穩定運行
技術亮點
-
采用稀土永磁材料，磁能穩定持久
-
隔離套特殊處理，渦流損耗降至最低
-
智能溫控系統，確保最佳工作狀態
-
多種軸承材質可選，適應不同介質特性
-
全不銹鋼結構，耐腐蝕性能優異
應用領域
-
化工工藝流程中危險介質輸送
-
制藥行業高純度藥液傳輸
-
電子行業高潔凈度化學品供應
-
石油化工易燃易爆介質處理
-
環保工程有毒有害廢水輸送
-
科研實驗特殊介質循環系統
專業服務支持
我們提供全方位技術服務：
-
工況分析與設備選型指導
-
安裝調試與操作培訓
-
預防性維護計劃制定
-
快速備件供應與技術支持
技術咨詢專線：021-51860957
歡迎提供具體介質參數與工況要求，獲取專業解決方案
以創新磁力技術，守護您的每一滴介質安全！
Germany Kaysen imported stainless steel magnetic pump overview
The stainless steel magnetic pump is composed of a magnetic pump consisting of a pump, a magnetic actuator and a motor. The key component magnetic actuator consists of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate, the magnetic field can penetrate the air gap and the non-magnetic material, and the inner magnetic rotor connected with the impeller rotates synchronously to realize the non-contact transmission of the power, and the dynamic seal is converted into a static seal. Since the pump shaft and the inner magnetic rotor are completely closed by the pump body and the isolation sleeve, the problem of “running, escaping, dripping and leaking” is completely solved, and the flammable, explosive, toxic and harmful medium of the refining and chemical industry is eliminated from the pump seal leakage. The safety hazard has effectively guaranteed the physical and mental health and safe production of employees.
The n pairs of magnets (n is an even number) are regularly arranged and assembled on the inner and outer magnetic rotors of the magnetic actuator, so that the magnet portions form a complete coupled magnetic system. When the inner and outer magnetic poles are in opposite poles, that is, the displacement angle Φ=0 between the two magnetic poles, the magnetic energy of the magnetic system is the lowest; when the magnetic pole rotates to the same pole, the displacement angle between the two magnetic poles is Φ=2π. /n, at this time the magnetic energy of the magnetic system is the largest. After the external force is removed, the magnetic force will return the magnet to the state with the lowest magnetic energy because the magnetic poles of the magnetic system repel each other. The magnet then moves to drive the magnetic rotor to rotate.
main feature:
Permanent magnets
The permanent magnet made of rare earth permanent magnet material has a wide operating temperature range (-45-400 ° C), high coercive force, good anisotropy in the direction of the magnetic field, and no demagnetization when the same pole phase is close. It is a good source of magnetic field.
Isolation set
When a metal isolating sleeve is used, the spacer is in a sinusoidal alternating magnetic field, and an eddy current is induced and converted into heat in a section perpendicular to the direction of the magnetic line. The expression of the eddy current is: where Pe- eddy current; K-constant; n - rated speed of the pump; T-magnetic drive torque; pressure in the F-sleeve; D- spacer inner diameter; resistivity of a material; Tensile strength. When the pump is designed, n and T are given by the working conditions. To reduce the eddy current, only F, D and so on can be considered. The use of high-resistivity, high-strength non-metallic materials to make the isolation sleeve, the effect is very obvious in reducing the eddy current.
Cooling lubricant flow
When the pump is running, a small amount of liquid must be used to flush and cool the annulus region between the inner magnetic rotor and the spacer sleeve and the friction pair of the sliding bearing. The flow rate of the coolant is usually 2% to 3% of the pump design flow rate, and the annulus region between the inner magnetic rotor and the isolation sleeve generates high heat due to the eddy current. When the cooling lubricating fluid is not enough or the flushing hole is not smooth or blocked, the medium temperature is higher than the working temperature of the permanent magnet, so that the inner magnetic rotor gradually loses magnetism and the magnetic actuator fails. When the medium is water or water-based liquid, the temperature rise of the annulus region can be maintained at 3-5 ° C; when the medium is hydrocarbon or oil, the temperature rise of the annulus region can be maintained at 5-8 ° C.
Sliding bearing
The material of the magnetic pump sliding bearing is impregnated graphite, filled with polytetrafluoroethylene, engineering ceramics, and the like. Because engineering ceramics have good heat resistance, corrosion resistance and friction resistance, the sliding bearings of magnetic pumps are mostly made of engineering ceramics. Since the engineering ceramics are very brittle and the expansion coefficient is small, the bearing clearance must not be too small to avoid the occurrence of a shaft hazard.
Since the sliding bearing of the magnetic pump is lubricated by the medium to be conveyed, the bearing should be made of different materials according to different media and working conditions.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們全面的產品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸的*合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
進口不銹鋼磁力泵(進口磁力泵）
